All Paver Services All Concrete Services Pavers — Ocoee Pavers — Winter Garden Concrete — Ocoee Concrete — Winter Garden Our 38-Point Process Warranty About Blog Contact Call: (689) 356-6292

Concrete pricing guide

How Much Does Concrete Cost in Orlando & Central Florida? (2026)

Typical installed prices for concrete driveways, patios, stamped and exposed-aggregate finishes, pads, steps, sidewalks, resurfacing and removal around Ocoee and Orlando, with the totals worked out for common sizes.

Updated November 17, 2026

L
Luan Silva · Founder, Ocoee Concrete & Pavers

Ocoee-based paver and concrete company, founded 2020. Pricing and methods below reflect how our crew quotes and installs work in West Orange, Osceola, Lake and Polk counties in 2026.

How much does concrete cost in Orlando and Central Florida?

In 2026, installed concrete in the Orlando area typically costs $10–$13 per square foot for our standard 4,000 psi fiber-reinforced broom finish, $13–$17 for exposed aggregate and $15–$22 for stamped and colored. A 600 sq ft two-car driveway in the standard mix is about $6,000–$7,800. Final prices come from a free written estimate after we see the site.

These are installed prices: they cover the work, equipment and finishing as well as the concrete itself. National averages run lower or higher depending on the region and the specification, so use the ranges here as a Central Florida starting point.

What does concrete cost per square foot by mix and finish?

The typical installed range is $8–$10 per square foot for a budget 3,000 psi broom finish and $10–$13 for our residential standard, 4,000 psi with fiber. Decorative finishes cost more because they add labor, color, sealer and skill. Heavy-vehicle slabs add thickness and rebar.

Mix or finishTypical installed price per sq ft
3,000 psi, broom finish (budget)$8–$10
4,000 psi with fiber, broom finish (our residential standard)$10–$13
Exposed aggregate$13–$17
Stamped and colored$15–$22
5,000 psi with rebar (RVs, boats, heavy trucks)$14–$18
Removing the old drivewayadds $1.50–$3.50

What does a 1-, 2- or 3-car concrete driveway cost?

A two-car driveway of about 600 sq ft typically costs $6,000–$7,800 in our standard mix. A one-car driveway of about 300 sq ft runs $3,000–$3,900, and a three-car driveway of about 900 sq ft runs $9,000–$11,700. Each total is the size multiplied by the per-square-foot range.

FinishPer sq ft1-car, about 300 sq ft2-car, about 600 sq ft3-car, about 900 sq ft
3,000 psi broom$8–$10$2,400–$3,000$4,800–$6,000$7,200–$9,000
4,000 psi fiber, broom (standard)$10–$13$3,000–$3,900$6,000–$7,800$9,000–$11,700
Exposed aggregate$13–$17$3,900–$5,100$7,800–$10,200$11,700–$15,300
Stamped and colored$15–$22$4,500–$6,600$9,000–$13,200$13,500–$19,800
5,000 psi with rebar$14–$18$4,200–$5,400$8,400–$10,800$12,600–$16,200

Add $1.50–$3.50 per square foot if an old driveway must come out first. More detail on options is on our concrete driveways page, and our driveway extension guide covers widening an existing one.

What do concrete patios, pads, steps and sidewalks cost?

A broom-finish concrete patio typically costs $11–$16 per square foot installed, and a stamped patio $15–$23. Small patios cost more per square foot, so the small sizes below sit at the high end or above the per-foot range once minimums apply. A 250 sq ft broom patio is about $2,800–$4,000, and a stamped one about $4,000–$5,800.

Patio sizeBroom finish ($11–$16)Stamped ($15–$23)
12x12 (144 sq ft)about $1,600–$2,300about $2,200–$3,300
10x20 (200 sq ft)about $2,200–$3,200about $3,000–$4,600
20x20 (400 sq ft)about $4,400–$6,400about $6,000–$9,200
20x30 (600 sq ft)about $6,600–$9,600about $9,000–$13,800

Stamped work is covered in more depth on our stamped concrete and concrete patios pages. If you are weighing materials for a patio or driveway, our concrete vs. pavers comparison lays out both sides.

What do resurfacing, repair and removal cost?

Resurfacing an existing slab typically costs $4–$8 per square foot for a plain overlay, up to $9–$14 for a stamped overlay. Crack repair on a typical residential driveway is about $200–$600, and lifting a sunken slab with foam injection about $400–$1,500. Removing an old slab adds $1.50–$3.50 per square foot.

An overlay only works on a slab that is structurally sound, so we check for movement before quoting. Our pages on resurfacing and concrete repair explain the options, and the guide to driveway cracks in Florida helps you tell cosmetic cracks from serious ones.

What is the spec behind the price?

The spec behind our residential price is 4 inches of 4,000 psi concrete with fiber reinforcement and control joints. For RVs, boats and heavy trucks, the slab is typically 5–6 inches thick with rebar, which is why the heavy-duty line costs more. Thickness, strength and joints are what separate a driveway that lasts from one that cracks early.

New concrete also needs care in the first days. Our new concrete curing guide explains what to do and what to avoid.

Why is installed concrete more than the price per yard?

The price per cubic yard covers only the delivered material. Installed concrete also pays for excavation and grading, forms, reinforcement, placing and finishing the slab, cutting joints, curing, cleanup and any permit work, which is why installed cost per square foot is higher than material cost alone. We do not sell ready-mix to the public, so we do not publish a per-yard price; a local batch plant can quote the delivered price.

The useful numbers are about quantity. One cubic yard covers about 81 sq ft at 4 inches thick, or about 54 sq ft at 6 inches. A 600 sq ft driveway at 4 inches therefore needs roughly 7.4 yards, and in practice a little more to allow for uneven ground and waste. A concrete order is also a rush job: once the truck arrives, the crew has a limited window to place and finish, so the labor is skilled and time-sensitive.

What moves a concrete price up or down?

Size, demolition, access, base condition and drainage fixes, finish, thickness and reinforcement, and permit or HOA requirements are the main drivers. Tree roots can add work as well. A small pad costs more per square foot than a large driveway.

Looking at pavers instead? Our paver cost guide has the matching numbers; typical mid-grade pavers cost $16–$22 per square foot against $10–$13 for standard concrete.

Do concrete prices change from city to city?

No. Our installed prices are the same across the Ocoee, Winter Garden, Orlando, Kissimmee and Clermont area. What changes is the approval route and the site: who issues the permit, whether an HOA reviews the plan, and what is going on with drainage and soil. The table shows the key local point for each area with its source. Rules get updated, so check with the office before you rely on a detail.

City or areaCountyWho handles permits, and the key local ruleLocal page
OcoeeOrangeCity of Ocoee permits through its online portal. The city's FAQ says a concrete slab, patio or driveway needs a permit with a site plan (city FAQ); right-of-way work goes through Public Works (city page).Concrete in Ocoee
Winter GardenOrangeCity Building Division, with concrete and driveways submitted as electronic zoning permits and pre-pour and final driveway inspections (city page). An impervious-area worksheet may be required (city FAQ).Concrete in Winter Garden
OrlandoOrangeCity Permitting Services. An Engineering Permit covers installing or removing concrete or expanding a driveway; work in the street, sidewalk or grass strip needs a Right-of-Way Permit (city page).Concrete in Orlando
KissimmeeOsceolaCity Engineering Division reviews driveway and sidewalk plans (city page). Slabs are a separate building permit type (2026 rule change).Concrete in Kissimmee
WindermereOrangeTown of Windermere. New or repaired driveways in the right-of-way use a town application with an inspection fee, and the town's conditions include a 5-foot side-line setback (town form).Concrete in Windermere
ApopkaOrangeCity Building Safety (city page) and Engineering Division for right-of-way work (city page). Its fee page lists a driveway inspection fee (fee page).Concrete in Apopka
ClermontLakeCity Building Services Division (city page). Its fee schedule lists a residential zoning clearance; ask whether it applies to your slab or driveway (fee schedule).Concrete in Clermont
DavenportPolkCity Building & Planning (city page). Concrete aprons and sidewalks are the default; pavers there need HOA or building-official approval (city rules).Concrete in Davenport
Lake NonaOrangeInside the City of Orlando, so Orlando's Engineering Permit and right-of-way rules apply (city page).Concrete in Lake Nona
Dr. PhillipsOrangeUnincorporated Orange County. The county says any pouring of concrete or placing of pavers needs a permit (county page); work in the right-of-way needs a recorded use agreement (agreement).Concrete in Dr. Phillips
Four CornersLake, Orange, Osceola, PolkThe parcel's county decides. Lake County's adopted code exempts some driveways and sidewalks near grade level (Lake County list); Orange County requires a permit for any concrete pour (Orange County).Concrete in Four Corners
CelebrationOsceolaUnincorporated Osceola County for permits (county driveway application); the Celebration architectural review committee has its own driveway guideline (driveway guideline).Concrete in Celebration

Our permits and HOA guide explains the statewide rules and what to prepare. For the places we serve, see our service areas page.

How do I get an exact concrete price?

Call (689) 356-6292 or use our contact page for a free written estimate. We measure the area, check access, drainage and what needs to come out, and write down the mix, thickness, finish and any permit work. Written warranty terms are on our warranty page. We work seven days a week, 7am–8pm, and carry general liability and workers' compensation insurance; the certificate is available on request.

Concrete cost questions

What is a typical price for a 2-car concrete driveway in Orlando?

About $6,000–$7,800 for a 600 sq ft driveway in 4,000 psi fiber-reinforced concrete with a broom finish, installed. Exposed aggregate runs about $7,800–$10,200 and stamped about $9,000–$13,200. A removal of the old driveway adds roughly $900–$2,100.

Is 4 inches thick enough for a driveway?

For cars and light trucks, 4 inches is the typical residential thickness. If you park an RV, a boat trailer or heavy work trucks, a 5–6 inch slab with rebar and 5,000 psi concrete is the better choice, at about $14–$18 per square foot installed.

How many yards of concrete does a driveway need?

One cubic yard covers about 81 sq ft at 4 inches thick. A 600 sq ft driveway needs roughly 7.4 yards, and a little more once uneven ground and waste are allowed for. At 6 inches thick, one yard covers about 54 sq ft.

Does the installed price include rebar or fiber?

Yes. Our standard 4,000 psi mix includes fiber reinforcement, and the 5,000 psi heavy-duty option includes rebar. Control joints, finishing and cleanup are part of the installed price as well, and a permit fee is included in the quote where a permit is required.

Why do small concrete jobs cost more per square foot?

Mobilization, forms, setup and finishing time do not shrink with the slab. A 12x12 patio needs most of the same steps as a 20x30 one. That is why small pads carry minimums, with a typical small pad running about $1,200–$4,000.

Is stamped concrete worth the extra cost?

It depends on what you want the surface to look like. Stamped and colored concrete typically costs $15–$22 per square foot, compared with $10–$13 for a broom finish. It gives a patterned look for less than most stone, but it needs resealing and its pattern cannot be reset the way pavers can.

Keep Reading

Related Guides

Want a firm number for your concrete?

Free written estimate · 7 days a week · No obligation

(689) 356-6292
Free Estimate Form