All Paver Services All Concrete Services Pavers — Ocoee Pavers — Winter Garden Concrete — Ocoee Concrete — Winter Garden Our 38-Point Process Warranty About Blog Contact Call: (689) 356-6292

POOL DECK GUIDE · CENTRAL FLORIDA · 2026

Best Pool Deck Material in Florida: Pavers, Travertine, Concrete and Coatings

A side-by-side guide to the main Florida pool deck materials, covering heat underfoot, traction, salt water, lifespan, cost per sq ft, overlays and when resurfacing beats replacing.

Updated November 17, 2026

L
Luan Silva · Founder, Ocoee Concrete & Pavers

Ocoee-based paver and concrete company, founded 2020. Pricing and methods below reflect how our crew quotes and installs work in West Orange, Osceola, Lake and Polk counties in 2026.

What is the best pool deck material in Florida?

For most Florida pool decks, light-colored concrete pavers give the best balance of cost, grip, heat and repairability. Travertine is the premium choice when budget allows, and broom-finish concrete or a spray-knockdown coating is the lowest-cost route. The right answer depends on sun, budget and what you already have.

A pool deck has different demands than a driveway. It is walked on barefoot, constantly wet, exposed to chlorine or salt, and often in full sun. That is why heat underfoot, traction and chemical resistance come before color. The sections below compare each material on those points, then cover overlays and resurfacing.

How do the main pool deck materials compare?

Concrete pavers and travertine are the two strongest all-round options, broom or exposed-aggregate concrete is the budget baseline, and spray-knockdown or cool-deck coatings are a resurfacing fix. Prices below are typical installed ranges for 2026.

MaterialPer sq ft installedHeat underfootTraction when wetTypical lifespan
Concrete pavers$15–$18Light colors comfortable; dark run hotterGood with a textured finishOften 25+ years with maintenance
Travertine$20–$25 (premium stone $27–$32)Often feels cooler than dark paversGood, natural textureOften 25+ years with sealing
Stamped concrete$15–$22Depends on color; dark runs hotNeeds a non-slip sealer additiveOften 15–25 years; color can wear
Broom-finish concrete$11–$16Warm in full sunGood, texturedOften 20–30 years
Exposed aggregate$13–$17Depends on stone color; light glareGood grip, rough on bare feetOften 20–30 years
Spray-knockdown or cool-deck coating (resurface)$5–$9Designed to run cooler than bare concreteTextured; depends on productShorter; recoat needed

For a 600 sq ft deck, that works out to roughly $9,000 to $10,800 for concrete pavers and $12,000 to $15,000 for travertine, about $9,000 to $13,200 for stamped, about $6,600 to $9,600 for broom-finish and $3,000 to $5,400 for a spray-knockdown resurface. Lifespans are typical ranges and depend on base, drainage and upkeep.

Which pool deck material stays coolest underfoot?

Light colors stay cooler than dark ones in every material. Travertine and light concrete pavers are comfortable for most people, while dark pavers, dark stamped concrete and plain gray slab feel hottest. Cool-deck coatings are made to reflect heat, and are the best cooling fix for an existing slab.

We do not quote surface temperatures because they depend on the day, the color, the sealer, the shade and the time. Forum and vendor claims vary, and some side-by-side tests found little difference between travertine and light pavers. Do your own test:

  1. Get full-size samples of two or three finishes in light colors.
  2. Leave them in direct sun at about 2 pm.
  3. Check them barefoot, dry and wet.
  4. Pick the one you can stand on comfortably, then match shade and landscaping.

Other things that help: shade structures, lighter grout and joint sand, and avoiding glossy wet-look sealers that can add heat and glare.

Which materials are safest when wet, and what about salt water?

Textured finishes give the best grip. Broom concrete, exposed aggregate, textured pavers and travertine all have traction when wet, while smooth stamped concrete and glossy sealers can be slick without a non-slip additive. Salt pools are harder on every material than chlorine pools.

Sealing intervals for pool decks, about every 18 to 24 months, are in our paver sealing guide.

Should I choose travertine or concrete pavers?

Choose concrete pavers if you want the lower price, wider color range and simple upkeep. Choose travertine if you prefer natural stone and have the budget for it. Travertine runs about $20 to $25 per sq ft installed against $15 to $18 for concrete pavers.

On a 500 to 750 sq ft deck that is about $8,000 to $12,500 for concrete pavers versus $11,000 to $16,500 for travertine. The detailed comparison, covering heat, pitting, tumbled versus honed, salt and repairs, is in our travertine vs concrete pavers guide. See also our service pages for paver pool decks and travertine.

How do broom-finish and exposed-aggregate concrete work for pool decks?

Broom-finish concrete is the standard low-cost pool deck: light surface ridges give grip, and it needs only occasional power washing. Exposed aggregate gives an upgraded look and strong grip, but the rough surface can be hard on bare feet and loose stone can end up in the pool.

If you choose plain concrete now, a spray-knockdown or overlay can be added later when the surface wears. See concrete patios for finish examples.

Can I install pavers over an existing concrete pool deck?

Sometimes. Pavers can go over a sound concrete deck if it is stable, drains correctly and the added height does not interfere with the pool coping, skimmer, doors or screen enclosure. A cracked or sinking deck should be removed or repaired first.

Removing an old deck adds $1.50 to $3.50 per sq ft, so an overlay can save money. The trade-offs are height, drainage and edges. The new surface must still slope away from the house and pool, and the overlay must not trap water at the coping or enclosure track. We evaluate the existing deck, its level, cracks and drainage before saying yes. Pool equipment, plumbing and electrical stay as they are, and we do not offer pool interior resurfacing.

When does resurfacing the deck make more sense than replacing it?

Resurfacing makes sense when the slab is structurally sound and the problem is surface wear, staining, heat or looks. A resurface costs a fraction of replacement, but it cannot fix a moving or settled slab or cracks that keep growing.

OptionTypical installed priceGood when
Plain overlay$4–$8 per sq ftSurface is worn but the slab is flat
Spray-knockdown texture$5–$9 per sq ftYou want a textured, lighter, cooler finish
Stenciled overlay$7–$12 per sq ftYou want a pattern without replacing
Stamped overlay$9–$14 per sq ftYou want a stone or paver look
Replace with pavers$15–$18 per sq ft plus removalSlab is cracked, heaved or low

Pick replacement when the slab has voids, wide or moving cracks or drains toward the house. Pick resurfacing when it is solid. Details, durability and cost for each overlay system are on our concrete resurfacing page. If cracks are the concern, see our guide to concrete cracks in Florida.

How do I choose for my own pool deck?

Start with sun and budget, then check traction and upkeep. If your deck is in full sun and you want comfort, go for light pavers or travertine, or a cool-deck coating on a good slab. If you want the lowest price, broom-finish or a resurface may be enough.

  1. Existing deck sound? If yes, a resurface or paver overlay is possible. If not, plan on replacement.
  2. Full sun or shade? Full sun favors light colors and cooler materials.
  3. Salt-water pool? Plan on sealing and rinsing, and avoid leaving natural stone unsealed.
  4. Budget? Compare per sq ft prices above, then add removal and any drainage fixes.
  5. HOA or permit needed? We prepare the HOA packet, and we include permit paperwork and fees in the written quote where a permit is required.

Call (689) 356-6292 for a free written estimate, or compare costs in our paver cost guide.

Pool deck materials: common questions

What is the coolest pool deck surface in Florida?

Light-colored travertine, light concrete pavers and cool-deck coatings stay more comfortable than dark pavers, dark stamped concrete or bare gray slab. Surface heat depends on color, shade and time of day, so test samples barefoot in afternoon sun.

How much does a pool deck cost in Central Florida?

Typical installed prices are $15 to $18 per sq ft for concrete pavers and $20 to $25 for travertine. A 500 to 750 sq ft deck is about $8,000 to $12,500 in pavers or $11,000 to $16,500 in travertine. Broom concrete and resurfacing cost less.

Is stamped concrete slippery around a pool?

It can be if sealed with a glossy sealer. A stamped pool deck should use a non-slip additive in the sealer, and some patterns grip better than others. Broom or exposed-aggregate finishes give more traction.

Can you lay pavers over my existing concrete pool deck?

Often, if the deck is solid, drains correctly and the added height will not interfere with coping, doors or the screen enclosure. A cracked or sinking deck should be removed or repaired first. We assess it on site.

Is travertine good for a salt-water pool?

Travertine can work, but it is porous and salt can pit and stain unsealed stone. Seal it, rinse the deck and reseal on schedule. Concrete pavers or a sealed alternative may be a lower-maintenance choice for salt pools.

Should I resurface or replace my pool deck?

Resurface if the slab is flat, solid and the problem is surface wear or heat. Replace if the slab is cracked, settling or drains poorly. Resurfacing costs about $4 to $14 per sq ft by system, versus $15 to $18 for pavers.

Keep Reading

Related Guides

Get a free written pool deck estimate

Free written estimate · 7 days a week · No obligation

(689) 356-6292
Free Estimate Form